I was tired of using binder clips and clamps to hold my airline in place and hope nothing slides out… I though to my self.. there must be a better way? Why yes there is! I made a rigid u shaped tube out of some left over acrylic pipe from mounting my DIY Osmolator sensors to securely hang over the edge of my tank.
I used a heat gun to heat up the acrylic pipe and simply bend at the warm/soft area to the desired shape. Be sure to do this very slowly so dont kink the inner tube. You will also want to keep moving the heat gun so you dont get bubbles in the rod from to much heat.
For the adjuster i razord the edge of a airline valve to a point (took off the excess bulk) heated up the end of the acrylic tube and worked it in. I then superglued the fittings together to ensure there was no chance of a leak.
Simply connect the airline from the bottom to your bucket and acclimate away! no more clips to fiddle width, scratch your glass or slide out of place! Simple and very effective.